|
PM981 Series
(M.2 PCIe Gen3 x4 SSD)
|
|
SAMSUNG M.2 (NGFF) PCIe Gen3 SSD
PM981 Series (NVMe)
PM981-NVMe-512G
Unit price: USD 260. |
|
|
PART NUMBER |
PM981-NVMe-512G
(MZVLW512HAJQ) |
|
Capacity1) |
512GB |
LBA2) |
1,000,215,216 |
Warranty Policy:
Our web shop follow Samsung Warranty Policy.
The warranted period will be count 12 Months after SAMSUNG production date.
Customer are responsible for the freight shipping back and forth. |
Hotfix for windows 8.1 https://support.microsoft.com/zh-cn/kb/2897143
Hotfix for windows 7, server2008 R2 https://support.microsoft.com/en-us/kb/2990941 |
PM981-NVMe-256G
Unit price: USD 142. |
|
|
PART NUMBER |
PM981-NVMe-256G
(MZVLB256HAHQ) |
|
Capacity1) |
256GB |
LBA2) |
500,118,192 |
Warranty Policy:
Our web shop follow Samsung Warranty Policy.
The warranted period will be count 12 Months after SAMSUNG production date.
Customer are responsible for the freight shipping back and forth. |
Hotfix for windows 8.1 https://support.microsoft.com/zh-cn/kb/2897143
Hotfix for windows 7, server2008 R2 https://support.microsoft.com/en-us/kb/2990941 |
Heat Sink 2x1.5cm
Unit price: USD 2. |
|
|
Heat Sink 2x1.5cm 5pcs
|
|
PM981 Series (NVMe)
Performance1) |
Drive Performance |
Parameter |
Unit |
Queue Depth |
256GB |
512GB |
1TB |
2TB |
Sequential Read2)
(Up to) |
MB/s |
QD = 32 |
TBD |
3,000 |
3,200 |
TBD |
Sequential Write2)
(Up to) |
MB/s |
QD = 32 |
TBD |
1,800 |
2,400 |
TBD |
Random Read3)
(Up to) |
IOPS |
QD = 1 |
TBD |
12K |
12K |
TBD |
IOPS |
QD = 32 |
TBD |
270K |
380K |
TBD |
Random Write3)
(Up to) |
IOPS |
QD = 1 |
TBD |
50K |
50K |
TBD |
IOPS |
QD = 32 |
TBD |
420K |
440K |
TBD |
NOTE:
1) Performance measured using CDM 5.0.2 on Windows 10 64bit. Actual performance may vary depending on use conditions and environment.
2) Sequential performance measured using 128KB data size. (QD=32 by Thread=1)
3) Random performance measured using 4KB data size. (QD=32 by Thread 4, QD=1 by Thread 1)
4) Performance measurements based on TurboWrite technology |
Power
Maximum Ratings |
Parameter |
Specifications |
Supply Voltage |
Allowable voltage |
3.3V ± 5% |
Allowable noise/ripple |
100mV p-p or less |
Power Consumption for M.2 (3.3V Supply) |
Parameter |
Specifications |
Power Consumption |
Active1 (Typical, RMS) |
Read |
5.9W |
Write |
5.7W |
Idle2 (Typical) |
30mW |
L1.23 (Typical) |
5mW |
NOTE:
1) Active power is measured on sequential write and read.
2) Idle Power is measured on Idle status with L1.2+APST/ASPM on.
3) If L1.2 time logging option is enabled, L1.2 Power could be 5mW.
4) Active/Idle/L1.2 Power are measured up to 1TB. |
MTBF
MTBF is Mean Time Between Failure, and is the predicted elapsed time between inherent failures of a system during operation. As same word,
AFR (annual failure ratio) is 0.4%. MTBF can be calculated as the arithmetic average time between failures of a system. |
MTBF Specifications |
Capacity |
MTBF |
256GB |
1,500,000 Hours |
512GB |
1TB |
2TB |
UBER
UBER is Uncorrectable Bit Error Rate. |
UBER Specifications |
Parameter |
Specification |
UBER |
< 1 sector per 1015 bits read |
Environmental Specification
Temperature, Humidity, Shock, Vibration |
UBER Specifications |
Parameter |
Mode |
Specification |
Temperature (Tc) |
Operating1) |
0°C to 70°C |
Non-operating |
-40°C to 85°C |
Humidity2) |
Non-operating |
5% to 95% |
Shock3) |
Non-operating |
1500G |
Vibration4) |
Non-operating |
20G |
NOTE:
1) Temperature is measured by SMART Temperature. Proper airflow recommended
2) Humidity is measured in non-condensing
3) Test condition for shock: 0.5ms duration with half sine wave
4) Test condition for vibration: 10Hz to 2000Hz |
Physical dimensions and Weight
Parameter |
Value |
Width |
22.00 ± 0.15 mm |
Length |
80.00 ± 0.15 mm |
Thickness |
Max. 2.38 mm |
Weight |
256/512GB/1/2TB |
Max 9.0g |
|
|
|